100g Qsfp28 Transceiver Cwdm4 2km On Smf Lc Connector For Data
Center And Ethernet
Overview
The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311
and 1331 nm as members of the CWDM wavelength grid defined in ITU-T
G.694.2. It contains a duplex LC connector for the optical
interface and a 38-pin connector for the electrical interface. To
minimize the optical dispersion in the long-haul system,
single-mode fiber (SMF) has to be applied in this module. Host FEC
is required to support up to 2km fiber transmission.
The product is designed with form factor, optical/electrical
connection and digital diagnostic interface according to the QSFP28
Multi-Source Agreement (MSA). It has been designed to meet the
harshest external operating conditions including temperature,
humidity and EMI interference.
Features
- QSFP28 MSA compliant
- CWDM4 lanes MUX/DEMUX design
- Supports 103.1Gb/s aggregate bit rate
- 100G CWDM4 MSA
- Up to 2km onSMF with FEC
- Operating case temperature: 0 to 70C
- 4x25G electrical interface (OIF CEI-28G-VSR)
- Maximum power consumption 3.5W
- LC duplex
- RoHS compliant
Parameter
| Package (Form Factor) | QSFP-100g-CWDM4 |
| Data Rate (typical) | 25.78G per CH |
| Centre Wavelength | 1271,1291,1311.1331nm |
| Distance | 2KM |
| Diagnostics | DDM |
| Transmitter | 4CH DFB |
| Receiver | 4CH PIN |
| TX Output Power (dBm) | -6.5~+2.5dbm |
| RX Sensitivity (dBm) | -10dbm |
| Low/High Case Temperature | 0°C~70°C |
| Voltage Supply (typical) | 3.3v |
| Connector | LC / UPC Duplex |
Application
- Data Center Interconnect
- 100G Ethernet
- Infiniband QDR and DDR interconnects
- Enterprise networking
QSFP28 100G Products
| Product PN | Description | Connector |
| QSFP28-100G-SR4 | 100GBASE SR4 QSFP Transceiver 100m over OM4 MMF | MPO-12CORE |
| QSFP28-100G-LR4 | 100GBASE LR4 QSFP Transceiver 10km over SMF | LC UPC |
| QSFP28-100G-CWDM4 | 100GBASE CWDM4 QSFP Transceiver 2km over SMF | LC UPC |
| QSFP28-100G-PSM4 | 100GBASE PSM4 QSFP Transceiver MPO 500m over SMF | MPO-12CORE |
FAQ(Frequently Asked Questions)
1. Can I have a sample order?What is your MOQ?
Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable,We do not have MOQ,1 sample is available.
2. What is the lead time?
For usual products,We keep stock,could ship 1~3 days after PO.For
big quantity and special products,Please check lead time with our
sales.
3. Dose your modules compatible to (HP/Extreme/Juniper,ect)
Yes,we code the optical transceivers compatible to
(HP/Extreme/Juniper).
4. What is your warranty time
We promise 3 years warranty for all products shipped from us.
5. Could I use our own logo and label?
Yes,we could provide a OEM service and make the products with your
own label.
6. Could I return the products if there is a quality problem?
Yes,if there is a quality problem happen,including products
defects,.we could accept free exchange or return and refund.
